Frame
Wheelbase: 215mm
Arm thickness: 5mm
X plate thickness: 2mm
Bottom plate thickness: 2mm
Upper plate thickness: 2mm
Receiver
Frsky XM+ or R-XSR Receiver
2307 2450kV Brushless Motor (Gold)
Motor kv: 2450rpm/v
No-load current (IO/10V): 2.1A
Support lithium battery section: 3-4S
Weight: 39.5 grams
Maximum continuous current: 52A
Maximum continuous power: 830W
Maximum thrust: 1337g (4s/5″)
Configuration: 12N/14P
Motor resistance (Rm): 0.0386Ω
Stator diameter: 23mm
Stator Thickness: 7mm
Motor Diameter: 28.5mm
Motor length: 19.7mm
Overall shaft length: 34.2mm
Shaft thickness: M5
Mounting hole spacing: 16mm
Mounting screw: M3
Recommended propeller: 5-6 inches
32-bit 50A 3-6S Dshot1200 4IN1 ESC
Continuous current: 50A
Peak current: 60A (10s)
Input voltage: 3-6s
BEC: none
Current meter: yes
Main control chip: STM32F051
Mos tube chip: TPH1R403
Firmware: Blheli_32
Support DSHOT150/300/600/1200/MULTISHOT/PWM/ONESHOT
MOS: 5×6
Weight: 13.5g
Mounting hole: 30.5×30.5mm /Φ3
Size: 49×37mm
Customized LAL-F405 Bluetooth Flight Controller
STM32F405 master
MPU: MPU6000 (via SPI)
Input voltage: support 2-6S Lipo input
Onboard Bluetooth module, support APP configuration through smartphone
Firmware: MATEKF405
Onboard German Bosch BMP280 high-precision barometer
The flight controller has an onboard OSD chip, supports DMA mode (uses F4 MCU to control the OSD), and can use the BetaFlight parameter adjustment software
software adjustment parameters
Built-in 5v/2A; 10V/2A BEC output
Reserve MicroSD BlackBox
Reserve 5 serial ports and I2C interfaces for GPS access (Bluetooth occupies TX5.RX5)
Support multiple types of receivers (such as: SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM, etc.
type of receiver)
It has an LED programming signal output port, supports programmable LED strips, and can adjust the strip color and flashing mode through the flight controller
Has a voltage monitor port (BAT) and a current monitor port (CRT) to monitor battery voltage and current (requires additional power
flow meter)
With buzzer output port, support external alarm buzzer for sound warning or notification of aircraft flight status
Onboard 10V BEC, providing a cleaner image display effect for video transmission
All interfaces have socket and pad options, suitable for different groups of people at the same time
Support betaflight/inav racing firmware
Size: 37x37mm
Mounting hole: 30.5×30.5mm
Weight: 5.9g
CADDX flat head camera
Product name: Ratel
color: red
Lens: 2.1mm
Image sensor: 1/1.8 inch starlight HDR sensor
Horizontal resolution: 1200TVL
FOV: 180 degrees
minimum. Latency: 8ms
TV system: NTSC and PAL (can be changed)
Image: 16:9 and 4:3 (can be changed)
WDR: Super WDR (HDR)
Minimum Lighting: Starlight
Sync: Internal
Electronic shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
Signal-to-noise ratio: > 60dB (AGC OFF)
Video output: CVBS
Camera OSD: Separate OSD
DNR: 3-DNR
Language: ENG / FRANCE / RUS / SPA / PU / KOREA / CHN / JAPAN
Day/Night: Auto/Color/B&W/External
Size: 19mm*19mm*19mm
Wide power input: DC 5-40V
Operating temperature: -20℃～+60℃
Working humidity: 20%~80%
Weight: 8g (net) / 40.5g (gross)
TX805 FPV Transmitter VTX
Item name: FPV transmitter VTX
Frequency: 5.8g
Channel: 40ch
Input voltage: 7V-24V
5V camera power supply: 120MA (MAX)–12V@25MW
5V camera power supply: 200MA (MAX)–12V@200MW
5V camera power supply: 300MA (MAX)–12V@600MW
5V camera power supply: 350MA (MAX)–12V@800MW
Additional Features: Smart Audio
Power supply: camera 5V/3A output
Output power: 25MW/200MW/600MW/800MW switchable
Antenna Connector: MMCX
Cable Connector: Pad
Size: 36mm*22mm*5mm, 30.5 stackable holes
Weight: 8g (without antenna)
Racerstar 5046 propeller
Specifications: 5046*3
Brand Name: Racerstar
Product name: 5046 propeller
Material: imported German Bayer PC
Quantity: 4 pairs (8 pieces)
Color: transparent
Weight: 5.1g/pc
Center thickness: 7mm
Spiral diameter: 127mm
Follow us on: